DTPI is a temperature probe interface that can handle up to 4 “one-wire” DS18B20 or DS18S20 temperature probes (sold separately). The probes can measure temperatures ranging from -55 to 125 Celsius while the interface is designed to operate between 0 and 70 Celsius.

Temperature probes are available in three cable lengths: 1m, 5m and 15m with pigtail connections. The DTPI has been tested with cable lengths of up to 30 meters. The DTPI also accepts a standard 1/8” stereo plug for probe cable connections. A 9V wall-wart is provided with the unit.

The BPS Bidirectional RF Power Sensor can continuously monitor forward and reflected power by being permanently installed in the transmission line.

Each sensor has two internal trimmers for field calibration of the output voltages of both forward and reflected powers.

The sensor comes in two versions. Model BPS1050 has a 30-500 MHz frequency range while Model BPS5095 has a 500-950 MHz frequency range.

These sensors are perfect complements for the Davicom units, and take advantage of their pre-programmed VSWR measurement function.

The SMDC-1 provides a contact for detection of door opening/closing. It is designed to be used indoor. Covers, spaces and screws are included.

The standard operating gap is 1”/25.4mm between the magnet and the reed relay case.

Capacitive Diesel Fuel Level Sensor for 1m tanks, rod type, 0-5V Output.
Liquids compatible with the construction materials, typically kerosene, petrol, diesel.

Not suitable for fuels which contain Toluene.

The IPCAM-I features a high quality video sensor combined with pan, tilt and IR Cut Filter for better quality images. In addition, the camera comes outfitted with an Auto-Brightness feature which automatically adjusts the brightness depending on the lighting conditions. It is fully compatible with the Davicom DV series of remote monitoring systems. The camera also offers I/O alarm pins for connection to other sensors/equipment.

The camera supports the following protocols: TCP/IP, DHCP, SMTP, HTTP, UPNP, PPPoE, FTP, DNS, UDP, GPRS and it also supports connection to a wireless network (Wi-Fi/802.11b/g). The IPCAM-1 also features WEP Encryption (64 and 128bits) and WPA/WPA2 Encryption (TKIP/AES).

Liquid Propane Measurement Sensor kit (includes HEM-1 and intrinsic safety barrier)

The RMSPS is a RMS RF Power Sensor designed to detect the power levels of complex RF waveforms such as DTV, CDMA and multiple transmitter signals combined onto a single antenna line for example. The power sensor is normally connected to an in-line directional coupler that allows signal sampling in both the forward and reflected directions.

The sensor comes in two versions. The Model RMSPS20 has a 20 dB RF attenuator at its input and is normally used for forward power measurements while the Model RMSPS8 has an 8 dB attenuator and is intended for reflected power measurements. Both sensors have a wide dynamic range and RF bandwidth.

These sensors are a perfect complement for the Davicom units.

The IPCAM-O features a 1.3 megapixel high resolution sensor for real-time HD video. It also features a built-in IR LED for IR night vision at up to 30m and a vandal-proof design.

The camera supports the following protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, IPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6.